- Compact, professional audio recorder for combination with a digital
- Spiegelreflex camera (DSLR camera), OR as a stand-alone field recorder
- Uses an SD/SDHC/SDXC card as recording medium
- Recording with sampling rates of 44.1/48/96/192 kHz and a resolutio;Up to six recording channels (4 channels) can be recorded with the Tascam HDDA microphone preamplifiers
- Audio quality recording inputs thanks to the Tascam HDDA microphone preamplifiers
- Audio quality recording inputs thanks to the Tascam HDDA microphone preamplifiers
- Audio quality recording inputs thanks to the Tascam HDDA microphone preamplifiers
- Audio quality recording inputs thanks to the Tascam HDDA microphone preamplifiers
- Up to six recording channels (Tascam HDDA microphone preamplifiers);up to six recording channels (4 channels + stereo mix)
- The recorder creates two recording files at the same time with
- different recording levels (-1 dB to -12 dB)
- Individual setting of recording levels for tracks 1-4
- ;for tracks 1-4
- Two built-in omnidirectional electret condenser microphones
- The four XLR/TRS combo jacks support line levels at +4 dBu and offer
- switchable phantom power (24/48 volts)
- Maximum input level: +24 dBu (20 dB Übersteuerungsreserve)
- Maximum amplification: 64 dB
- Additional line input for tracks 1 and 2 (stereo mini-jack)
- allows connection of a camera microphone or other microphones with a high
- output level (power supply for small microphones can be switched on)
- W&l;The delay compensation compensates for time delays caused by different
- distances of two microphones from the sound source (150 ms)
- FüFive-stage switchable low-cut filter (40/80/120/180/220 Hz)
- Multiband limiter makes it possible to control too high input levels;The input level controls 1-4 are displayed
- A built-in mixer allows panorama and level settings
- as well as pre-harmonising channels and can output a mix of four channels
- ;Input level controls can be grouped
- The DR-701D's audio mix can be output to a DSLR camera
- A camera input allows the audio signal from the camera to be monitored
- The time and starting/stopping of the recording can be controlled via HDMI;The time and start/stop of the recording can be synchronised with the camera via HDMI (depending on the camera type)
- The audio signal of the recorder can be forwarded to another recorder via HDMI
- Time code can be received via a separate input;The built-in time code generator ensures that start times are recorded even if the time code fails
- Flap signal function (automatic/manual)
- Set up to 99 marks in a file (BWF format is supported)
- Set up to 99 marks in a file (BWF format is supported)
- Set up to 99 marks in a file (BWF format is supported)
- Set up to 99 marks in a file (BWF format is supported)
- Set up to 99 marks in a file (BWF format is supported)
- Set up to 99 marks in a file (BWF format is supported)
- Set up to 99 marks in a file (BWF format is supported)
- Set up to 99 marks in a file;
- While recording, a new audio file can be created
- Determine whether file names should be generated from the date or a specified string
- .
- The unit remembers the last playback position so that you can continue playback
- after switching off and on again at this point
- By means of cascading üMultiple DR-701Ds can be controlled and monitored together via HDMI
- A sound generator simplifies the leveling of a network
- Headphone output with 2 x 50 m;Headphone output with 2 x 50 mW output power
- High-quality audio output via a separate line output
- Panel lock protects against accidental misuse
- The transport buttons and the SLATE button are made of rubber to prevent handling damage
- A sound generator simplifies leveling of a sound system
- Headphone output with 2 x 50 mW output power
- High-quality audio output via a separate line output
- The control panel lock protects against accidental misuse
- The transport buttons and the SLATE button are made of rubber to prevent handling damage;The transport keys and the SLATE button are made of rubber to prevent handling damage
- Graphic display (128 x 64 pixels) with illumination
- LED displays can be read even in direct sunlight
- USB 2.0 interface ( USB cable with Micro-B socket included )
- Tripod adapter ( inch, 6.35 mm) on the bottom
- Camera mount on the top allows easy mounting and dismounting
- Flash shoe adapter (accessible if the camera mount is not included);The side handles on the front protect the display and can be used to attach a carrying strap
- Optional accessories: RC-3F foot switch and RC-10 wireless remote control
- Power supply via four AA batteries, USB connection, Tascam PS-P515U AC adapter or Tascam BP-6AA battery pack
- (both sold separately)
Options
No
No
Yes
Yes
Yes
No
Construction
6
SD Card
192 kHz
Connections
6
8
4
Others
Others