Alto Professional ZMX 862
- Input channels: Mono channels (Ch. 1 - 2)
- Microphone input: Electronically balanced, discrete input configuration
- &transmission range: 20 Hz to 22 kHz, +/-1 dB
- Thorn distortion (THD&N): ?0.005% at +4 dBu, 1 kHz
- Gain range: 0 dB to 50 dB (Mic)
- Maximum gain: 70 dB Ch. Mic input→Main MIx Out & Tape Out, 80 dB Ch. Mic input→Control room & Headphone, 60 dB Ch. Mic Input→Aux Send
- SNR (Signal / Noise Ratio): ?110 dBu
- Phantom Power (Mic Pin 2 / Pin 3 and Pin 1): +48 V - with Switch Control
- Line Input: Electronically Balanced
- &Umble;transmission range: 20 Hz to 22 kHz, +/-1 dB
- Tone distortion (THD&N): ?0.005% at + 4 dBu, 1 kHz
- Gain Range: 15 dBu to 35 dBu
- Stereo Channels: (Ch. 3 - 6)
- Line Input: Electronically balanced
- SNR (Signal to Noise Ratio): ?110 dBu
- &Umble Range: 20 Hz to 22 kHz, +/-1 dB
- Thorn Distortion (THD&N): ?0.005% @ + 4 dBu, 1 kHz
- Gain range: -20 dBu to +20 dBu, 60 dB Ch. Line → Main Mix Out
- Maximum voltage boost: 20 dB FX Return → Main Mix Out, 20 dB RCA Tape Input → Main Mix Out
- Impedance
- Microphone input: 3.9 kOhm
- All other inputs: 10 kOhm or higher
- Tape Out: 1 kOhm
- All other outputs: 120 Ohm
- Equalizer
- Mono channels: High ±15 dB @ 12 kHz, Mid ±15 dB @ 2.5 kHz, Low ±15 dB @ 80 Hz
- Stereo channels: High ±15 dB @ 12 kHz, Mid ±15 dB @ 2.5 kHz, Low ±15 dB @ 80 Hz
- Main Mix
- Tape, Aux, Headphone output
- Output level: 0 dBu unbalanced, 1/4" jacks, Max Out +22 dBu unbalanced, 1/4" jacks noise (Bus Noise): ?-90 dB @ 20 Hz - 22 kHz (channel & Main level at 0 dB, other at minimum, DSP mute)
- Power supply: 18 V, 1500 mA
- Power consumption: 18 W
Options
No
No
No
Yes
Yes
Construction
No
Connections
2
2
2
No
